How to use the Philips/Saeco Coffee Oil remover tablets

1. Switch ON the machine
2. Fill the water tank with tap water to the MAX indicator and place a cup underneath the coffee spout
3. Put one coffee oil remover tablet in the pre-ground coffee compartment
4. Select the pre-ground coffee function
5. Select coffee and start brewing. When half a cup of water has been brewed, unplug the machine
6. Let the coffee oil remover solution act for at least 15 minutes. Insert the mains plug back into a wall socket and switch on the machine. The machine will start heating up and perform an automatic rinse.
7. Open the service door and remove the brew group.
8. Rinse the brew group thoroughly with tap water
9. Reinsert the brew group into the machine and put a cup underneath the coffee spout
10. Select the pre-ground coffee function again and do not add any pre-ground coffee
11. Select coffee and start brewing. The machine will dispense some water. Repeat this step twice.

1. Open the service door and remove the brew group
2. Put one coffee oil remover tablet in a cup and fill the cup with 150 ml hot water. Wait until the tablet is completely dissolved
3. Use the coffee oil remover solution to clean the filter of the brew group. Use a soft sponge or brush to clean the filter.
4. After cleaning, let the solution act for 15 minutes
5. After 15 minutes, rinse the brew group thoroughly with tap water
6. Place back the brew group into the machine.

Coffee oil remover tablets do not descale your Saeco espresso machine. You can use the Saeco descaler (CA6700 or CA6702) to descale your Saeco espresso machine.