Internal Philips drive To do: Check if the Philips drive is detected by the PC. The Philips drive is detected by the PC if it is visible in the BIOS (Basic Input/output System). How to: 1. Turn on the PC and press the key to get into the BIOS menu (this is usually shown in the corner of the screen, most common keys are Esc, F1-key, F2-key, F10-key, Del-key) 2. Use the up, down, left and right keys to go to BIOS menu item Primary/Slave IDE If the Philips drive is not visible in the BIOS you will have to open the PC and check the cabling on the drive and jumper settings. Warnings: * Always disconnect the power cable from the computer before handling the drive to prevent electrical damage * Ground yourself and your tools by touching the computer cover or frame before handling the drive to prevent damage to the electrical components * Avoid touching the pins with pliers to keep from bending the pins